Core
Fixed 45°Best for secure, fixed installs
Permanent POS, self-checkout, digital signage where the display never needs to move.
9 stands. Every use case covered — from retail checkout to conference rooms. Find the right one in under a minute.
All Counter Stands
Each card is a self-contained answer — use case, specs, and SKU. Filter above to narrow down.
Best for secure, fixed installs
Permanent POS, self-checkout, digital signage where the display never needs to move.
Best for reliable, reverse-tilt viewing
Retail counters, reception desks, interactive kiosks that need a durable, steel-and-aluminum base.
Best for full-motion positioning
Retail display kiosks and information stands in high-traffic areas — tilt, flip, and swivel to face any customer.
Best for checkout with a receipt printer
Retail checkout and ticketing counters that need a tablet and receipt printer secured side by side.
Best for hiding cables & power
Conference rooms, boardrooms, anywhere a tidy install matters. Stores adapter or battery pack inside. Note: supports VESA 100mm only — not 75mm.
Best for maximum reach & range
Reception desks, check-in counters, anywhere the tablet needs to swing 24″ toward the customer.
Prefer Universal?
These three don't require a VESA-compatible enclosure — they clamp, adhere, or lock directly onto the tablet itself.
Best for a fast, non-VESA install
Retail, hospitality, and healthcare counters — any tablet up to 11″ freestanding, or any size once bolted or adhesive-mounted.
Best for universal tablets on a stable base
Retail, hospitality, and self-service counters that need Mast-level stability without a VESA enclosure.
Best for mobile staff, grab-and-go
Retail floor staff and roaming payments — pull the tablet off to walk the floor, then dock it back as a stationary display.
Decision Guide
Common deployment scenarios — matched to the right product.
A permanent register position that never needs to move. Simple, low-cost, and secure against theft.
Tablet and receipt printer need to sit together on the same counter, secured as one unit.
Best fit: Tablet Printer Kiosk
The tablet needs to swing out toward the visitor for signatures or ID capture, then back toward staff.
Best fit: Reach
Durable, theft-resistant countertop mounting with clean cable routing for high-traffic ordering stations.
Clean aesthetics are non-negotiable. Internal storage for adapters and power blocks eliminates visible cable runs.
Best fit: AV Capsule
Multiple users need to tilt, flip, and swivel the display to their own viewing angle throughout the day.
Best fit: Rise
Devices change often, or you'd rather skip a VESA enclosure altogether. These clamp, adhere, or lock directly onto the tablet.
Best fit: GlideTab or Cling Mast
Staff need to carry the tablet onto the floor for line-busting or tableside checkout, then dock it back as a stationary display.
Best fit: Grip and Dock
Side-by-Side
All 9 stands at a glance. Structured for quick scanning.
| Stand | Motion | Max Screen Size | Max Load | VESA | Cable Mgmt | Secures to Counter | Material | SKU |
|---|---|---|---|---|---|---|---|---|
| Core | Fixed 45° | 20″ | 10 lb | 75 & 100 | — | ✓ | Steel | 111B / 111W |
| Mast | Reverse tilt | 20″ | 10 lb | 75 & 100 | ✓ | ✓ | Steel & aluminum | 333B / 333W |
| Rise | Full motion | 20″ | 10 lb | 75 & 100 | ✓ | ✓ | Aluminum | TCDP04 / TCDP01 |
| Tablet Printer Kiosk | Adjustable tilt | 20″ | 5.5 lb | 75 & 100 | ✓ | ✓ | Aluminum | PK01 |
| AV Capsule | Fixed 30° | 15″ | 10 lb | 100 | ✓ | ✓ | Steel | 341B |
| Reach | Full motion | 24″ | 10 lb | 75 & 100 | ✓ | ✓ | Aluminum | 660REACH |
| GlideTab | Fixed | 11″ freestanding / Any mounted | 3 lb | Universal (non-VESA) | ✓ | ✓ | Aluminum | GLDTABB / GLDTABW |
| Grip and Dock | Full motion | Universal | 5 lb | Universal (non-VESA) | — | ✓ | Steel | 189BGRPLCK |
| Cling Mast | Adjustable tilt | 8″–14.6″ | 3.67 lb | Universal (non-VESA) | ✓ | ✓ | Steel & aluminum | 333UCLB |
FAQ
Written to match exactly how people search — so you get the right answer, wherever you look.
The Core is the simplest, most secure option for a fixed checkout position. If you need a reverse-tilt viewing angle or heavier-duty steel-and-aluminum construction, the Mast is a strong alternative. For checkout stations that also need a receipt printer, use the Tablet Printer Kiosk instead.
The Reach supports the largest screens — up to 24 inches, with 16″ of lift and 24″ of extension. The Core, Mast, and Rise all support up to 20 inches. The AV Capsule is sized for smaller displays, up to 15 inches.
Yes — all of the counter stands on this page support VESA 100mm mounting. The Core, Mast, Rise, Tablet Printer Kiosk, and Reach also support VESA 75mm. Tablet-specific enclosures and adapters are sold separately.
Yes. The Core, Mast, AV Capsule, Tablet Printer Kiosk, and Reach can all be secured directly to a counter or desk. The Mast and Rise can also be used freestanding, with an optional stability base for extra grip on larger tablets.
A fixed stand holds the tablet at a set angle — the Core at 45°, the AV Capsule at 30°. A full-motion stand like the Rise or Reach can tilt, swivel, and in Reach’s case extend outward, letting the display be repositioned for each customer. Use fixed stands for permanent, single-purpose installs; use full-motion for shared or customer-facing counters.
Yes — the Tablet Printer Kiosk is purpose-built for this. It secures a tablet and a compact receipt printer (up to 6.3″ x 5.12″ x 5.91″) side by side in one aluminum housing, and is available with a range of tablet enclosures.
The AV Capsule has an internal storage compartment built specifically to conceal a charging adapter or battery pack behind a clean, rounded enclosure — ideal for conference room tables. The Mast and Rise also include dedicated cable management for a tidy countertop look.
You don't need one. The GlideTab, Grip and Dock, and Cling Mast all clamp, adhere, or lock directly onto the tablet itself, so they work with almost any device — iPad, Galaxy Tab, Surface, and more — without a separate enclosure.
The GlideTab is the simplest and most affordable, best for tablets up to 11″ freestanding. The Grip and Dock adds a removable hand grip, so staff can carry the tablet and dock it back when stationary. The Cling Mast costs more but adds Mast-level stability and an adjustable clamp for larger tablets, 8″ to 14.6″.